Maretrons deluxe starter kit provides all the necessary cables and connectors necessary to connect two products together on an NMEA 2000® network.
MARETRON NMEA 2000 STARTER KIT PROFESSIONAL
Maretron NMEA2000 Cable-Starter-Kit Deluxe by Maretron. Maretron NMEA 2000 Professional Deluxe Starter Kit w/ Cables for 2 Devices Product Description. Simply connect the J2K100 together with the Maretron universal display ( DSM250) or DSM410and GPS antenna/receiver ( GPS200) and you have a system capable of displaying gallons per hour and/or miles per gallon. Home > Marine Equipment & Accessories > Marine Electronics > Maretron Vessel Monitoring and Control Systems > Maretron Cables and Connectors > Maretron NMEA2000 Cable-Starter-Kit Deluxe. The J2K100 can also be used as part of a complete fuel computer. The J2K100 does not transmit any information over the J1939 network so it will not interfere with existing engine control or status data in any way. The J2K100 only listens to the J1939 network and draws no power from it (power is derived from the NMEA 2000 interface). All the information you need is available anywhere and everywhere you need it. The Maretron NMEA 2000 ® Network Installation Guide offers details on Maretrons entire line of cabling and connector products, as well as a guide to planning and installing NMEA 2000 ® networks. Everything you will need to start your NMEA 2K Network. The NMEA 2000® cable system includes five. Cable and Connector Network Basics 1.1 Network Topology The NMEA 2000® cable system uses a trunk (sometimes referred to as the backbone) and drop line topology as shown in Figure 1.
MARETRON NMEA 2000 STARTER KIT FULL
Critical engine, transmission, and genset data is then distributed throughout the vessel over a single cable where it can be monitored by any NMEA 2000 compatible display. Maretron supplies a full line of NMEA 2000 ® Approved cabling and connectors to form a reliable backbone for any NMEA 2000 ® system. Maretron is known for their high quality and durable NMEA 2000 parts, this starter kit includes: 2 T connectors, Powertap T, 2 Male Terminators, 1m Drop/Backbone Cable, and a 6m Drop/Backbone Cable. NMEA 2000® Standard for Serial-Data Networking of Marine Electronic Devices NMEA Installation Standards 1. Maretron's J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 engine data to the NMEA 2000 marine digital interface.
Maretrons Cable-Starter-Kit provides all the necessary cables and connectors necessary to connect two products together on an NMEA2000 network. The network is easily expanded by adding a tee and branch cable for each additional product that is added to an NMEA2000 network. Maretron J1939 to NMEA 2000 Gateway - J2K100 J2K100-01 Maretron J1939 to NMEA 2000 gateway Dual Device NMEA2000 Starter Kit (CABLE-STARTER-KIT) by Maretron®.
0 kommentar(er)
